Lift-out FIB Grids
EM-Tec FIB lift-out grids

EM-Tec FIB lift-out grids

 

Introduction

 

The EM-Tec FIB grids have been devised for lift-out techniques with FIB or SEM/FIB systems. They offer a secure way to attach the TEM lamellas to the posts of the grid. The TEM lamella can then be easily imaged in the SEM/FIB, TEM or used for EBSD analysis. The EM-Tec FIB grids are available in multiple post configurations. The shape of the Em-Tec FIB lift-out grids has been optimized for accessibility. The EM-Tec FIB lift-out grids are compatible with all standard 3mm TEM grid holders. All EM-Tec FIB lift-out grids have a number etched into the left side of the FIB lift-out grid to distinguish front and back.  This number corresponds with the number of posts on the grid. For easy post identification, there are unique symbols beneath each post. Available both in copper and molybdenum.

EM-Tec FIB lift-out grids, Cu, 3 posts with detail post top

 

Copper EM-Tec FIB lift out grids

 

The copper EM-Tec FIB lift-out grids are available with either 2, 3, 4 or 5 posts. Thickness is 30-40µm, which makes them more rigid then standard TEM grids. EM-Tec FIB lift-out grids undergo a unique cleaning process to reduce contamination; this results in improved mounting and imaging of the TEM lamellas. Due to the manufacturing process, the copper FIB lift-out grids have a set-back ridge at the edge of the front side and exhibit smooth side walls. The EM-Tec copper FIB grids al include unique indicator markers for each post. Packaging size is vial/100.

 

 

 2 post FIB lift-out grid  3 post FIB lift-out grid  4 post FIB lift-out grid  5 post FIB lift-out grid
 post size 250x200µm  post sizes 125x200 & 80x200µm  post size 80x200µm  post size 60x190µm
 attach single lamellas  attach multiple TEM lamellas attach many TEM lamellas  attach many TEM lamellas

Unique smooth side wall Molybdenum EM-Tec FIB lift-out grids

 

 

Smooth side wall Molybdenum EM-Tec FIB lift-out grids
Smooth wall of FIB grid post

 

A common problem with Mo FIB lift-out grids is the roughness of the side wall. It takes valuable FIB time to smooth out the sidewall of the standard molybdenum FIB lift-out grids to enable secure mounting of the TEM lamellas. To solve this common problem and to reduce cost at the FIB, we have developed the smooth side wall Mo EM-Tec FIB lift-out grids. They are made with a unique manufacturing process with the result that smoothing with the FIB is virtually eliminated or reduced to a fraction of the time previously needed. These unique Mo EM-Tec FIB lift-out grids are available with two, three, four or five posts and a thickness of 45-55µm. Packaging size is vial with 25 Molybdenum FIB grids.

  • Smooth side wall Mo grids
  • Virtually eliminates FIB smoothing before mounting
  • Saves valuable FIB time
  • Reduce overall costs
  • Unique Indicating markers for each post
  • Improved lamellae mounting
 2 post FIB lift-out grid  3 post FIB lift-out grid  4 post FIB lift-out grid  5 post FIB lift-out grid
 post size 250x200µm  post sizes 125x200 & 80x200µm  post size 80x200µm  post size 60x190µm
 attach single lamellas per post  attach multiple TEM lamellas  attach many TEM lamellas  attach many TEM lamellas

 

Contact Us